The EARTEC HUB Full Duplex Wireless Intercom System provides full duplex wireless communication to larger production staffs that need to stay in constant voice contact while working with their hands.
There are 6 wireless and 1 hard-wired headsets in the case below.
The headsets fit snugly in the case. To put them back, alternate the side that the microphone is on. This will help them fit better. Keep the hub unit and the hard-wired headset attached.
There are two batteries per headset as well as two batteries for the hub. Please charge the spare batteries while using the system.
To power the hub, either use the power cable in the kit (standard Edison plug), or one of the batteries. You can place the battery with the arrow facing up. Insert into the hub in the direction of the arrow.
To power the wireless headsets, insert a battery with the arrow facing up, into the headset in the direction of the arrow.
The power button is on top and the volume control buttons are directly below. To communicate with the team, pull the microphone down. To mute your microphone, push it up and it will disengage.
The hub and the wireless remote units have been preset to be paired together. If you should need to reset the system, please follow the instructions in this video: